DS-K1T321MFWX — Setup Guide

Prerequisites

• Active WLTT SaaS account with Company Admin access
• Device mounted and powered on
• Wi-Fi or Ethernet network with internet access
• Device serial number (on the label at the back)

Step 1: Add Device in WLTT Dashboard

1. 1Log in to saas.wltt.asia → Devices → Add Device
2. 2Select brand
3. 3Enter device name and serial number
4. 4Select the department this device belongs to
5. 5Click Save — the system will generate a Webhook URL
6. 6Copy the Webhook URL — you will need it in the next step

Step 2: Configure the Device

1. 1Open the device web interface (enter the device IP in a browser)
2. 2Go to System and Maintenance → System Configuration → Network → Network Service → HTTP Listening
3. 3Enable HTTP Listening and set Destination IP / Domain to saas.wltt.asia
4. 4Set URL to /api/events/hikvision/YOUR_DEVICE_TOKEN
5. 5Set Port to 443 and Protocol Type to HTTPS
6. 6Do not configure ISUP; the WLTT endpoint is an HTTP listener, not an ISUP server
7. 7Save, perform a test scan, and check the device event journal in WLTT

Step 3: Verify Connection

1. 1In the dashboard go to Devices
2. 2Find your device — status should become Online
3. 3Do a test face scan on the device
4. 4Go to Attendance — the record should appear

Troubleshooting